Broski offers a simple, step-bystep method for San Diego auto detailing. This guide walks you through the steps to make your car look as if it were just bought – read this?

Step 1 – Pre-Wash Preparation

Begin with a rinse. Consider it like sifting out the crumbs and vacuuming. This will help remove any loose dirt from the vehicle and reduce scratches. Grab a hose with high-pressure and give your vehicle a thorough cleaning.

Step 2 – The Two-Bucket Method

The two-bucket wash is not any ordinary wash. One bucket of soapy, and one bucket for rinsing the mitt. You can use soap to scrub, then rinse with clean water in order to prevent the grime from spreading. It’s similar to washing dishes, only more rewarding.

Step 3 – Wheels first

Your wheels will attract road grime and brake dust. You can use a special wheel cleaner and brush for these nasty boys. You need to get into the nooks and crevices. It’s like flossing your tires.

Step 4 – Suds Up

Once you’ve done the prep, it’s finally time to get lathering! Use a pH-balanced shampoo for your car to protect the paint. Work your way down, gravity will help you. Start with the roof. Next, move on to the windows and doors. Finally, you will reach the lower panels.

Step 5 – Rinse and dry

To dry without streaks or spots, use microfiber towels. Or even better, a leaf blower! For a streak-free finish, use microfiber towel or – even better – a leafblower. Yes, it isn’t just for the autumn leaves.

Step 6: Clay Bar Treatment

You can think of clay bar treatments as an exfoliating treatment for your car. Spray some lubricant and then use the clay bars to make it as smooth as possible. This method removes contaminants missed by the wash.

DetailBroski Mobile Auto Detailing San Diego
3875 Van Dyke Ave #15
San Diego, CA 92105

Phone: (619) 304-0180